Explaining Solar PV Training – Where To Go

In a nutshell, ‘Green Energy’ utilises natural resources such as sunlight, wind, tides and geothermal heat to provide our daily energy requirement. They are considered ‘Green’ because they are environmentally friendly. It is easy to think that we may be travelling back in time when we think of items such as wind power and windmills. However, it is the result of eco-efficient and planet friendly options that this process is maintained.

The home can use a range of new ideas to help with energy usage – including Solar Thermal and Solar Water Heating Collectors. Equally there is electricity that is generated through roof-installed panels. A further factor revolves around stoves and boilers – which are known as Biomass Energy. There is also the ground heat from the Sun – now known as Ground Source Heat Pumps. Considering items such as Wind Power and Hydro Turbines, we are finally getting to very old forms of energy production.

Solar Energy Systems: Often called Solar Energy, this is fact based on two types of solar panels each using different ideas to get their results. Initially, there is the process of obtaining hot water from the Sun via Solar Water Heating Collectors. Additionally, there is the method of converting solar radiation into electricity known as Photovoltaic – or simply Solar Electrical panels. Solar Panels themselves need to be away from all light blocks, and should be on south facing roofs at angles of 30 degrees from the horizontal plane.

Within Solar Energy overall, Solar Water Power is most commonly used in the UK. With the capacity to deliver 50 percent plus of a household’s hot water requirement annually, Solar Water heating systems are crucial to energy in the UK. Typically, to fit this type of equipment will cost between 500 and 1500 pounds for a DIY kit – all the way up to 2-5k for a full professional fitting.

Biomass Energy: This term encompasses all forms of natural products – such as plant and animal material. Considering its ability to produce energy in the form of heat and electricity, this type of energy is extremely flexible. Furthermore, within the European Markets, the UK is one of the central producers of Biomass fuels. One of the main factors of this style of energy is the result without the impact on C02. To that end, many wood crops come from sustainable sources (as one tree is felled, another is planted in its place; thus the new tree absorbs the CO2 produced during the heating process.)

‘Energy Crops’ trees such as Willow and Poplar play a major part in the process – under the banner of Short Rotation Coppice (SRC). Perennial grasses also produce a high yield of dry matter. Within this process also sits the lesser known Agricultural and Municipal Wastes. Agricultural Waste is commonly formed as a by-product of traditional agricultural work. Another biomass source is that of municipal waste – and this comes from recycled wood or food.

Systems Using Geo-Thermal Energy – Used in the generation of both warm water and electricity, this energy mainly comes from the Sun and heats the Earth. By using the ground source temperature of approximately 12 degrees, we can either heat or cool buildings within the UK. Generally, items such as Heat Pumps are thought of as very effective, as they produce four units of energy for every one that is used for generation. A greater return of energy (sometimes almost 100 percent) is produced – because heat source pumps can operate in-line with wind turbines and solar electrical panels.

Wind Energy Programs: In use for milling grain or pumping water, wind energy has been with us for a very long time, although its modern uses are complex. However, in more recent times there’s been the option to recover the energy for its own sake – and deliver this either to a home unit or to the local power grid. The UK is considered as one of the best sources of wind generation within Europe. Potentially, we can produce 10 percent of our annual energy needs through wind power, although at present within the UK we still only use 1 percent. Frankly, electricity can be realised from as little as 2p per kWh – as opposed to the current level of 2-10 p per kWh. Recovery of the cost involved is somewhere between 6-9 months.

Last of all there is Hydropower – an area of especial importance to the UK. Having said that, the art of using energy from moving water (just like wind power) is very traditional. Within the UK, this form of energy production is responsible for somewhere in the region of 2 percent of all electrical needs.

By using a turbine, a Hydropower system can transfer the kinetic energy of moving water into another form. Turbines use either a water drop (e.g. through a dam) or by a natural ‘run of the river’ – thereby having no water storage reservoir. ‘Micro-Hydro’ however utilises old outdated sluices and dams. Although a lesser known form of electricity output, this process could supply 200mW of UK demand. The expected cost of installing a system such as this would be between 200 pounds and 3k per kW of output.

Because of the energy need of the Western World, we are now seeing a rapid rise in ‘Green Energy’. The UK is very well placed to provide most of the schemes set out above, and the UK domestic market again is one of the key beneficiaries of this technology.

Electricians and Plumbers in particular are expected to provide the main thrust of domestic installation expertise. With ‘Green Energy’ rising up the political agenda in Europe, a range of financial aids and grants are becoming available. This is a new industry – but getting the right certification can only improve job security and opportunities for the future. Electrical or plumbing training that incorporates green technology could be very useful for the future.

Copyright 2009 S. Edwards. Look at Green Engineer Certification or electricalcoursegb.co.uk/RenewableEnergyCertification.html.